;+ ; NAME: ; MWRFITS ; PURPOSE: ; Write all standard FITS data types from input arrays or structures. ; ; CALLING SEQUENCE: ; MWRFITS, Input, Filename, [Header], ; /LSCALE , /ISCALE, /BSCALE, ; /USE_COLNUM, /Silent, /Create, /No_comment, /Version, $ ; Alias=, /ASCII, Separator=, Terminator=, Null=, ; /Logical_cols, /Bit_cols, /Nbit_cols, ; Group=, Pscale=, Pzero= ; ; INPUTS: ; Input = Array or structure to be written to FITS file. ; ; -When writing FITS primary data or image extensions ; input should be an array. ; --If data is to be grouped ; the Group keyword should be specified to point to ; a two dimensional array. The first dimension of the ; Group array will be PCOUNT while the second dimension ; should be the same as the last dimension of Input. ; --If Input is undefined, then a dummy primary dataset ; or Image extension is created [This might be done, e.g., ; to put appropriate keywords in a dummy primary ; HDU]. ; ; -When writing an ASCII table extension, Input should ; be a structure array where no element of the structure ; is a structure or array (except see below). ; --A byte array will be written as A field. No checking ; is done to ensure that the values in the byte field ; are valid ASCII. ; --Complex numbers are written to two columns with '_R' and ; '_I' appended to the TTYPE fields (if present). The ; complex number is enclosed in square brackets in the output. ; --Strings are written to fields with the length adjusted ; to accommodate the largest string. Shorter strings are ; blank padded to the right. ; ; -When writing a binary table extension, the input should ; be a structure array with no element of the structure ; being a substructure. ; ; If a structure is specified on input and the output ; file does not exist or the /CREATE keyword is specified ; a dummy primary HDU is created. ; ; Filename = String containing the name of the file to be written. ; By default MWRFITS appends a new extension to existing ; files which are assumed to be valid FITS. The /CREATE ; keyword can be used to ensure that a new FITS file ; is created even if the file already exists. ; ; OUTPUTS: ; ; OPTIONAL INPUTS: ; Header = Header should be a string array. Each element of the ; array is added as a row in the FITS header. No ; parsing is done of this data. MWRFITS will prepend ; required structural (and, if specified, scaling) ; keywords before the rows specified in Header. ; Rows describing columns in the table will be appended ; to the contents of Header. ; Header lines will be extended or truncated to ; 80 characters as necessary. ; If Header is specified then on return Header will have ; the header generated for the specified extension. ; ; OPTIONAL INPUT KEYWORDS: ; ALias= Set up aliases to convert from the IDL structure ; to the FITS column name. The value should be ; a STRARR(2,*) value where the first element of ; each pair of values corresponds to a column ; in the structure and the second is the name ; to be used in the FITS file. ; The order of the alias keyword is compatible with ; use in MRDFITS. ; ASCII - Creates an ASCII table rather than a binary table. ; This keyword may be specified as: ; /ASCII - Use default formats for columns. ; ASCII='format_string' allows the user to specify ; the format of various data types such using the following ; syntax 'column_type:format, column_type:format'. E.g., ; ASCII='A:A1,I:I6,L:I10,B:I4,F:G15.9,D:G23.17,C:G15.9,M:G23.17' ; gives the default formats used for each type. The TFORM ; fields for the real and complex types indicate will use corresponding ; E and D formats when a G format is specified. ; Note that the length of the field for ASCII strings and ; byte arrays is automatically determined for each column. ; BIT_COLS= An array of indices of the bit columns. The data should ; comprise a byte array with the appropriate dimensions. ; If the number of bits per row (see NBIT_COLS) ; is greater than 8, then the first dimension of the array ; should match the number of input bytes per row. ; BSCALE Scale floats, longs, or shorts to unsigned bytes (see LSCALE) ; CREATE If this keyword is non-zero, then a new FITS file will ; be created regardless of whether the file currently ; exists. Otherwise when the file already exists, ; a FITS extension will be appended to the existing file ; which is assumed to be a valid FITS file. ; GROUP= This keyword indicates that GROUPed FITS data is to ; be generated. ; Group should be a 2-D array of the appropriate output type. ; The first dimension will set the number of group parameters. ; The second dimension must agree with the last dimension ; of the Input array. ; ISCALE Scale floats or longs to short integer (see LSCALE) ; LOGICAL_COLS= An array of indices of the logical column numbers. ; These should start with the first column having index 0. ; The structure element should be an array of characters ; with the values 'T' or 'F'. This is not checked. ; LSCALE Scale floating point numbers to long integers. ; This keyword may be specified in three ways. ; /LSCALE (or LSCALE=1) asks for scaling to be automatically ; determined. LSCALE=value divides the input by value. ; I.e., BSCALE=value, BZERO=0. Numbers out of range are ; given the value of NULL if specified, otherwise they are given ; the appropriate extremum value. LSCALE=(value,value) ; uses the first value as BSCALE and the second as BZERO ; (or TSCALE and TZERO for tables). ; NBIT_COLS= The number of bits actually used in the bit array. ; This argument must point to an array of the same dimension ; as BIT_COLS. ; NO_TYPES If the NO_TYPES keyword is specified, then no TTYPE ; keywords will be created for ASCII and BINARY tables. ; No_comment Do not write comment keywords in the header ; NULL= Value to be written for integers/strings which are ; undefined or unwritable. ; PSCALE= An array giving scaling parameters for the group keywords. ; It should have the same dimension as the first dimension ; of Group. ; PZERO= An array giving offset parameters for the group keywords. ; It should have the same dimension as the first dimension ; of Group. ; Separator= This keyword can be specified as a string which will ; be used to separate fields in ASCII tables. By default ; fields are separated by a blank. ; SILENT Suppress informative messages. Errors will still ; be reported. ; Terminator= This keyword can be specified to provide a string which ; will be placed at the end of each row of an ASCII table. ; No terminator is used when not specified. ; If a non-string terminator is specified (including ; when the /terminator form is used), a new line terminator ; is appended. ; USE_COLNUM When creating column names for binary and ASCII tables ; MWRFITS attempts to use structure field name ; values. If USE_COLNUM is specified and non-zero then ; column names will be generated as 'C1, C2, ... 'Cn' ; for the number of columns in the table. ; Version Print the version number of MWRFITS. ; ; EXAMPLE: ; Write a simple array: ; a=fltarr(20,20) ; mwrfits,a,'test.fits' ; ; Append a 3 column, 2 row, binary table extension to file just created. ; a={name:'M31', coords:(30., 20.), distance:2} ; a=replicate(a, 2); ; mwrfits,a,'test.fits' ; ; Now add on an image extension: ; a=lonarr(10,10,10) ; hdr=("COMMENT This is a comment line to put in the header", $ ; "MYKEY = "Some desired keyword value") ; mwrfits,a,'test.fits',hdr ; ; RESTRICTIONS: ; (1) Variable length columns are not supported for anything ; other than simple types (byte, int, long, float, double). ; NOTES: ; This multiple format FITS writer is designed to provide a ; single, simple interface to writing all common types of FITS data. ; Given the number of options within the program and the ; variety of IDL systems available it is likely that a number ; of bugs are yet to be uncovered. If you find an anomaly ; please send a report to: ; Tom McGlynn ; NASA/GSFC Code 660.2 ; tam@silk.gsfc.nasa.gov (or 301-286-7743) ; ; PROCEDURES USED: ; FXPAR(), FXADDPAR, IS_IEEE_BIG(), HOST_TO_IEEE ; MODIfICATION HISTORY: ; Version 0.9: By T. McGlynn 1997-07-23 ; Initial beta release. ; Dec 1, 1997, Lindler, Modified to work under VMS. ; Version 0.91: T. McGlynn 1998-03-09 ; Fixed problem in handling null primary arrays. ; Reconverted to IDL 5.0 format using IDLv4_to_v5 ; Version 0.92: T. McGlynn 1998-09-09 ; Add no_comment flag and keep user comments on fields. ; Fix handling of bit fields. ; Version 0.93: T. McGlynn 1999-03-10 ; Fix table appends on VMS. ; Version 0.93a W. Landsman/D. Schlegel ; Update keyword values in chk_and_upd if data type has changed ; Version 0.94: T. McGlynn 2000-02-02 ; Efficient processing of ASCII tables. ; Use G rather than E formats as defaults for ASCII tables ; and make the default precision long enough that transformations ; binary to/from ASCII are invertible. ; Some loop indices made long. ; Fixed some ends to match block beginnings. ; Version 0.95: T. McGlynn 2000-11-06 ; Several fixes to scaling. Thanks to David Sahnow for ; documenting the problems. ; Added PCOUNT,GCOUNT keywords to Image extensions. ; Version numbers shown in SIMPLE/XTENSION comments ; Version 0.96: T. McGlynn 2001-04-06 ; Changed how files are opened to handle ~ consistently ; Version 1.0: T. McGlynn 2001-12-04 ; Unsigned integers, ; 64 bit integers. ; Aliases ; Variable length arrays ; Some code cleanup ; Version 1.1: T. McGlynn 2002-2-18 ; Fixed major bug in processing of unsigned integers. ; (Thanks to Stephane Beland) ; ; ;- ; What is the current version of this program. function mwr_version return, '1.1' end ; Find the appropriate offset for a given unsigned type ; or just return 0 if the type is not unsigned. function mwr_unsigned_offset, type if (type eq 12) then begin return, uint(32768) endif else if (type eq 13) then begin return, ulong('2147483648') endif else if (type eq 15) then begin return, ulong64('9223372036854775808') endif return, 0 end ; Add a keyword as non-destructively as possible to a FITS header pro chk_and_upd, header, key, value, comment xcomm = "" if n_elements(comment) gt 0 then xcomm = comment if n_elements(header) eq 0 then begin fxaddpar, header, key, value, xcomm endif else begin oldvalue = fxpar(header, key, count=count, comment=oldcomment) if (count eq 1) then begin qchange = 0 ; Set to 1 if either the type of variable or its ; value changes. size1 = size(oldvalue) & size2 = size(value) if size1[size1[0]+1] NE size2[size2[0]+1] then qchange = 1 $ else if (oldvalue ne value) then qchange = 1 if (qchange) then begin if n_elements(oldcomment) gt 0 then xcomm = oldcomment[0] fxaddpar, header, key, value, xcomm endif endif else begin fxaddpar, header, key, value, xcomm endelse endelse end ; Get the column name appropriate for a given tag function mwr_checktype, tag, alias=alias if not keyword_set(alias) then return, tag sz = size(alias) ; 1 or 2 D string array with first dimension of 2 if (sz[0] eq 1 or sz[1] eq 2) and sz[1] eq 2 and sz[sz[0]+1] eq 7 then begin w = where(tag eq alias[0,*]) if (w[0] eq -1) then begin return, tag endif else begin return, alias[1,w[0]] endelse endif else begin print,'MWRFITS: Warning: Alias values not strarr(2) or strarr(2,*)' endelse return, tag end ; Create an ASCII table pro mwr_ascii, input, siz, lun, bof, header, $ ascii=ascii, $ null=null, $ use_colnum = use_colnum, $ lscale=lscale, iscale=iscale, $ bscale=bscale, $ no_types=no_types, $ separator=separator, $ terminator=terminator, $ no_comment=no_comment, $ silent=silent, $ alias=alias ; Write the header and data for a FITS ASCII table extension. types= ['A', 'I', 'L', 'B', 'F', 'D', 'C', 'M', 'K'] formats=['A1', 'I6', 'I10', 'I4', 'G15.9','G23.17', 'G15.9', 'G23.17','I20'] lengths=[1, 6, 10, 4, 15, 23, 15, 23, 20] ; Check if the user is overriding any default formats. sz = size(ascii) if sz[0] eq 0 and sz[1] eq 7 then begin ascii = strupcase(strcompress(ascii,/remo)) for i=0, n_elements(types)-1 do begin p = strpos(ascii,types[i]+':') if p ge 0 then begin q = strpos(ascii, ',', p+1) if q lt p then q = strlen(ascii)+1 formats[i] = strmid(ascii, p+2, (q-p)-2) len = 0 reads, formats[i], len, format='(1X,I)' lengths[i] = len endif endfor endif i0 = input[0] ntag = n_tags(i0) tags = tag_names(i0) ctypes = lonarr(ntag) strmaxs = lonarr(ntag) if not keyword_set(separator) then separator=' ' slen = strlen(separator) offsets = 0 tforms = '' ttypes = '' offset = 0 totalFormat = "" xsep = ""; for i=0, ntag-1 do begin totalFormat = totalFormat + xsep; sz = size(i0.(i)) if sz[0] ne 0 and (sz[sz[0]+1] ne 1) then begin print, 'MWRFITS Error: ASCII table cannot contain arrays' return endif ctypes[i] = sz[1] xtype = mwr_checktype(tags[i], alias=alias) ttypes = [ttypes, xtype+' '] if sz[0] gt 0 then begin ; Byte array to be handled as a string. nelem = sz[sz[0]+2] ctypes[i] = sz[sz[0]+1] tf = 'A'+strcompress(string(nelem)) tforms = [tforms, tf] offsets = [offsets, offset] totalFormat = totalFormat + tf offset = offset + nelem endif else if sz[1] eq 7 then begin ; Use longest string to get appropriate size. strmax = max(strlen(input.(i))) strmaxs[i] = strmax tf = 'A'+strcompress(string(strmax), /remo) tforms = [tforms, tf] offsets = [offsets, offset] totalFormat = totalFormat + tf ctypes[i] = 7 offset = offset + strmax endif else if sz[1] eq 6 or sz[1] eq 9 then begin ; Complexes handled as two floats. offset = offset + 1 if sz[1] eq 6 then indx = where(types eq 'C') if sz[1] eq 9 then indx = where(types eq 'M') indx = indx[0] fx = formats[indx] if (strmid(fx, 0, 1) eq "G" or strmid(fx, 0, 1) eq "g") then begin if (sz[1] eq 6) then begin fx = "E"+strmid(fx,1, 99) endif else begin fx = "D"+strmid(fx,1, 99) endelse endif tforms = [tforms, fx, fx] offsets = [offsets, offset, offset+lengths[indx]+1] nel = n_elements(ttypes) ttypes = [ttypes[0:nel-2], xtype+'_R', xtype+'_I'] offset = offset + 2*lengths[indx] + 1 totalFormat = totalFormat + '"[",'+formats[indx]+',1x,'+formats[indx]+',"]"' offset = offset+1 endif else begin if sz[1] eq 1 then indx = where(types eq 'B') $ else if sz[1] eq 2 or sz[1] eq 12 then indx = where(types eq 'I') $ else if sz[1] eq 3 or sz[1] eq 13 then indx = where(types eq 'L') $ else if sz[1] eq 4 then indx = where(types eq 'F') $ else if sz[1] eq 5 then indx = where(types eq 'D') $ else if sz[1] eq 14 or sz[1] eq 15 then indx = where(types eq 'K') $ else begin print, 'MWRFITS Error: Invalid type in ASCII table' return endelse indx = indx[0] fx = formats[indx] if (strmid(fx, 0, 1) eq 'G' or strmid(fx, 0, 1) eq 'g') then begin if sz[1] eq 4 then begin fx = 'E'+strmid(fx, 1, 99) endif else begin fx = 'D'+strmid(fx, 1, 99) endelse endif tforms = [tforms, fx] offsets = [offsets, offset] totalFormat = totalFormat + formats[indx] offset = offset + lengths[indx] endelse if i ne ntag-1 then begin offset = offset + slen endif xsep = ", '"+separator+"', " endfor if keyword_set(terminator) then begin sz = size(terminator); if sz[0] ne 0 or sz[1] ne 7 then begin terminator= string(10B) endif endif if keyword_set(terminator) then offset = offset+strlen(terminator) ; Write required FITS keywords. chk_and_upd, header, 'XTENSION', 'TABLE', 'ASCII table extension written by MWRFITS '+mwr_version() chk_and_upd, header, 'BITPIX', 8,'Required Value: ASCII characters' chk_and_upd, header, 'NAXIS', 2,'Required Value' chk_and_upd, header, 'NAXIS1', offset, 'Number of characters in a row' chk_and_upd, header, 'NAXIS2', n_elements(input), 'Number of rows' chk_and_upd, header, 'PCOUNT', 0, 'Required value' chk_and_upd, header, 'GCOUNT', 1, 'Required value' chk_and_upd, header, 'TFIELDS', n_elements(ttypes)-1, 'Number of fields' ; Recall that the TTYPES, TFORMS, and OFFSETS arrays have an ; initial dummy element. ; Write the TTYPE keywords. if not keyword_set(no_types) then begin for i=1, n_elements(ttypes)-1 do begin key = 'TTYPE'+ strcompress(string(i),/remo) if keyword_set(use_colnum) then begin value = 'C'+strcompress(string(i),/remo) endif else begin value = ttypes[i]+' ' endelse chk_and_upd, header, key, value endfor if (not keyword_set(no_comment)) then begin fxaddpar, header, 'COMMENT', ' ', before='TTYPE1' fxaddpar, header, 'COMMENT', ' *** Column names ***', before='TTYPE1' fxaddpar, header, 'COMMENT', ' ', before='TTYPE1' endif endif ; Write the TBCOL keywords. for i=1, n_elements(ttypes)-1 do begin key= 'TBCOL'+strcompress(string(i),/remo) chk_and_upd, header, key, offsets[i]+1 endfor if (not keyword_set(no_comment)) then begin fxaddpar, header, 'COMMENT', ' ', before='TBCOL1' fxaddpar, header, 'COMMENT', ' *** Column offsets ***', before='TBCOL1' fxaddpar, header, 'COMMENT', ' ', before='TBCOL1' endif ; Write the TFORM keywords for i=1, n_elements(ttypes)-1 do begin key= 'TFORM'+strcompress(string(i),/remo) chk_and_upd, header, key, tforms[i] endfor if (not keyword_set(no_comment)) then begin fxaddpar, header, 'COMMENT', ' ', before='TFORM1' fxaddpar, header, 'COMMENT', ' *** Column formats ***', before='TFORM1' fxaddpar, header, 'COMMENT', ' ', before='TFORM1' endif ; Write the header. mwr_header, lun, header ; Now loop over the structure and write out the data. totalFormat = "("+totalFormat+")"; start = 0L last = 1023L while (start lt n_elements(input)) do begin if (last ge n_elements(input)) then begin last = n_elements(input) - 1 endif strings = string(input[start:last], format=totalFormat) if keyword_set(terminator) then begin strings = strings+terminator endif writeu, lun, strings start = last + 1 last = last + 1024 endwhile ; Check to see if any padding is required. nbytes = n_elements(input)*offset padding = 2880 - nbytes mod 2880 if padding ne 0 then begin pad = replicate(32b, padding) endif writeu, lun, pad return end ; Write a dummy primary header-data unit. pro mwr_dummy, lun fxaddpar, header, 'SIMPLE', 'T','Dummy Created by MWRFITS v'+mwr_version() fxaddpar, header, 'BITPIX', 8, 'Dummy primary header created by MWRFITS' fxaddpar, header, 'NAXIS', 0, 'No data is associated with this header' fxaddpar, header, 'EXTEND', 'T', 'Extensions may (will!) be present' mwr_header, lun, header end ; Check if this is a valid pointer array for variable length data. function mwr_validptr, vtypes, nfld, index, array type = -1 offset = 0L for i=0, n_elements(array)-1 do begin if ptr_valid(array[i]) then begin sz = size(*array[i]) if sz[0] gt 1 then begin print,'MWRFITS: Error: Multidimensional Pointer array' return, 0 endif if type eq -1 then begin type = sz[sz[0] + 1] endif else begin if sz[sz[0] + 1] ne type then begin print,'MWRFITS: Error: Inconsistent type in pointer array' return, 0 endif endelse xsz = sz[1] if sz[0] eq 0 then xsz = 1 offset = offset + xsz endif endfor if type eq -1 then begin ; If there is no data assume an I*2 type type = 2 endif if (type lt 1 or type gt 5) and (type lt 12 or type gt 15) then begin print,'MWRFITS: Error: Unsupported type for variable length array' endif types = 'BIJED IJKK' sizes = [1,2,4,4,8,0,0,0,0,0,0,2,4,8,8] if n_elements(vtypes) eq 0 then begin vtype = {status:0, data:array, $ type: strmid(types, type-1, 1), $ itype: type, ilen: sizes[type-1], $ offset:offset } vtypes = replicate(vtype, nfld) endif else begin ; This ensures compatible structures without ; having to used named structures. vtype = vtypes[0] vtype.status = 0 vtype.data = array vtype.type = strmid(types, type-1, 1) vtype.itype = type vtype.ilen = sizes[type-1] vtype.offset = offset vtypes[index] = vtype endelse vtypes[index].status = 1; return, 1 end ; Handle the header for a binary table. pro mwr_tablehdr, lun, input, header, vtypes, $ no_types=no_types, $ logical_cols = logical_cols, $ bit_cols = bit_cols, $ nbit_cols= nbit_cols, $ no_comment=no_comment, $ alias=alias, $ silent=silent if not keyword_set(no_types) then no_types = 0 nfld = n_tags(input[0]) if nfld le 0 then begin print, 'MWRFITS Error: Input contains no structure fields.' return endif tags = tag_names(input) ; Get the number of rows in the table. nrow = n_elements(input) dims = lonarr(nfld) tdims = strarr(nfld) types = strarr(nfld) pointers= lonarr(nfld) ; offsets = null... Don't want to define this ; in advance since reference to ulon64 won't word with IDL < 5.2 ; ; Get the type and length of each column. We do this ; by examining the contents of the first row of the structure. ; nbyte = 0 for i=0, nfld-1 do begin a = input[0].(i) sz = size(a) nelem = sz[sz[0]+2] type_ele = sz[sz[0]+1] if type_ele eq 7 then begin maxstr = max(strlen(input.(i))) endif dims[i] = nelem if (sz[0] lt 1) or (sz[0] eq 1 and type_ele ne 7) then begin tdims[i] = '' endif else begin tdims[i] = '(' if type_ele eq 7 then begin tdims[i] = tdims[i] + strcompress(string(maxstr), /remo) + ',' endif for j=1, sz[0] do begin tdims[i] = tdims[i] + strcompress(sz[j]) if j ne sz[0] then tdims[i] = tdims[i] + ',' endfor tdims[i] = tdims[i] + ')' endelse case type_ele of 1: begin types[i] = 'B' nbyte = nbyte + nelem end 2: begin types[i] = 'I' nbyte = nbyte + 2*nelem end 3: begin types[i] = 'J' nbyte = nbyte + 4*nelem end 4: begin types[i] = 'E' nbyte = nbyte + 4*nelem end 5: begin types[i] = 'D' nbyte = nbyte + 8*nelem end 6: begin types[i] = 'C' nbyte = nbyte + 8*nelem end 7: begin types[i] = 'A' nbyte = nbyte + maxstr*nelem dims[i] = maxstr*nelem end 9: begin types[i] = 'M' nbyte = nbyte + 16*nelem end 10: begin if not mwr_validptr(vtypes, nfld, i, input.(i)) then begin return endif types[i] = 'P'+vtypes[i].type nbyte = nbyte + 8 dims[i] = 1 test = mwr_unsigned_offset(vtypes[i].itype) if test gt 0 then begin if (n_elements(offsets) lt 1) then begin offsets = ulon64arr(nfld) endif offsets[i] = test endif end 12: begin types[i] = 'I' if (n_elements(offsets) lt 1) then begin offsets = ulon64arr(nfld) endif offsets[i] = mwr_unsigned_offset(12); nbyte = nbyte + 2*nelem end 13: begin types[i] = 'J' if (n_elements(offsets) lt 1) then begin offsets = ulon64arr(nfld) endif offsets[i] = mwr_unsigned_offset(13); nbyte = nbyte + 4*nelem end ; 8 byte integers are not standard fits 14: begin if not keyword_set(silent) then begin print, "MWRFITS: Warning: 8 byte integers are non-standard (column "+strtrim(i+1,2)+')' endif types[i] = 'K' nbyte = nbyte + 8*nelem end 15: begin if not keyword_set(silent) then begin print, "MWRFITS: Warning: 8 byte integers are non-standard (column "+strtrim(i+1,2)+')' endif types[i] = 'K' nbyte = nbyte + 8*nelem if (n_elements(offsets) lt 1) then begin offsets = ulon64arr(nfld) endif offsets[i] = mwr_unsigned_offset(15) end 0: begin print,'MWRFITS Error: Undefined structure element??' return end 8: begin print, 'MWRFITS Error: Nested structures' return end else:begin print, 'MWRFITS Error: Cannot parse structure' return end endcase endfor ; Put in the required FITS keywords. chk_and_upd, header, 'XTENSION', 'BINTABLE', 'Binary table written by MWRFITS v'+mwr_version() chk_and_upd, header, 'BITPIX', 8, 'Required value' chk_and_upd, header, 'NAXIS', 2, 'Required value' chk_and_upd, header, 'NAXIS1', nbyte, 'Number of bytes per row' chk_and_upd, header, 'NAXIS2', n_elements(input), 'Number of rows' chk_and_upd, header, 'PCOUNT', 0, 'Normally 0 (no varying arrays)' chk_and_upd, header, 'GCOUNT', 1, 'Required value' chk_and_upd, header, 'TFIELDS', nfld, 'Number of columns in table' ; ; Handle the special cases. ; if keyword_set(logical_cols) then begin nl = n_elements(logical_cols) for i = 0, nl-1 do begin icol = logical_cols[i] if types[icol-1] ne 'A' then begin print,'WARNING: Invalid attempt to create Logical column:',icol goto, next_logical endif types[icol-1] = 'L' next_logical: endfor endif if keyword_set(bit_cols) then begin nb = n_elements(bit_cols) if nb ne n_elements(nbit_cols) then begin print,'WARNING: Bit_cols and Nbit_cols not same size' print,' No bit columns generated.' goto, after_bits endif for i = 0, nb-1 do begin nbyte = (nbit_cols[i]+7)/8 icol = bit_cols[i] if types[icol-1] ne 'B' or (dims[icol-1] ne nbyte) then begin print,'WARNING: Invalid attempt to create bit column:',icol goto, next_bit endif types[icol-1] = 'X' tdims[icol-1] = '' dims[icol-1] = nbit_cols[i] next_bit: endfor after_bits: endif ; Write scaling info as needed. if n_elements(offsets) gt 0 then begin w = where(offsets gt 0) for i=0, n_elements(w) - 1 do begin key = 'TSCAL'+strcompress(string(w[i])+1,/remo) chk_and_upd, header, key, 1 endfor for i=0, n_elements(w) - 1 do begin key = 'TZERO'+strcompress(string(w[i]+1),/remo) chk_and_upd, header, key, offsets[w[i]] endfor if not keyword_set(no_comment) then begin key = 'TSCAL'+strcompress(string(w[0])+1,/remo) fxaddpar, header, 'COMMENT', ' ', before=key fxaddpar, header, 'COMMENT', ' *** Unsigned integer column scalings ***', before=key fxaddpar, header, 'COMMENT', ' ', before=key endif endif ; Now add in the TFORM keywords for i=0, nfld-1 do begin if dims[i] eq 1 then begin form = types[i] endif else begin form=strcompress(string(dims[i]),/remove) + types[i] endelse tfld = 'TFORM'+strcompress(string(i+1),/remove) ; Check to see if there is an existing value for this keyword. ; If it has the proper value we will not modify it. ; This can matter if there is optional information coded ; beyond required TFORM information. oval = fxpar(header, tfld) oval = strcompress(string(oval),/remove_all) if (oval eq '0') or (strmid(oval, 0, strlen(form)) ne form) then begin chk_and_upd, header, tfld, form endif endfor if (not keyword_set(no_comment)) then begin fxaddpar, header, 'COMMENT', ' ', before='TFORM1' fxaddpar, header, 'COMMENT', ' *** Column formats ***', before='TFORM1' fxaddpar, header, 'COMMENT', ' ', before='TFORM1' endif ; Now write TDIM info as needed. for i=nfld-1, 0,-1 do begin if tdims[i] ne '' then begin fxaddpar, header, 'TDIM'+strcompress(string(i+1),/remo), tdims[i],after=tfld endif endfor w=where(tdims ne '') if w[0] ne -1 and not keyword_set(no_comment) then begin fxaddpar, header, 'COMMENT', ' ', after=tfld fxaddpar, header, 'COMMENT', ' *** Column dimensions (2 D or greater) ***', after=tfld fxaddpar, header, 'COMMENT', ' ', after=tfld endif for i=0, nfld-1 do begin if tdims[i] ne '' then begin chk_and_upd, header, 'TDIM'+strcompress(string(i+1),/remo), tdims[i] endif endfor if n_elements(vtypes) gt 0 then begin fxaddpar, header, 'THEAP', nbyte*n_elements(input), 'Offset of start of heap' offset = 0L for i=0,n_elements(vtypes)-1 do begin if vtypes[i].status then offset = offset + vtypes[i].offset*vtypes[i].ilen endfor fxaddpar, header, 'PCOUNT', offset, 'Size of heap' endif ; ; Last add in the TTYPE keywords if desired. ; if not no_types then begin for i=0, nfld - 1 do begin key = 'TTYPE'+strcompress(string(i+1),/remove) if not keyword_set(use_colnums) then begin value= mwr_checktype(tags[i],alias=alias)+' ' endif else begin value = 'C'+strmid(key,5,2) endelse chk_and_upd, header, key, value endfor if (not keyword_set(no_comment)) then begin fxaddpar, header, 'COMMENT', ' ', before='TTYPE1' fxaddpar, header, 'COMMENT', ' *** Column names *** ',before='TTYPE1' fxaddpar, header, 'COMMENT', ' ',before='TTYPE1' endif endif if (not keyword_set(no_comment)) then begin fxaddpar, header, 'COMMENT', ' ', after='TFIELDS' fxaddpar, header, 'COMMENT', ' *** End of mandatory fields ***', after='TFIELDS' fxaddpar, header, 'COMMENT', ' ', after='TFIELDS' endif ; Write to the output device. mwr_header, lun, header end ; Modify the structure to put the pointer column in. function mwr_retable, input, vtypes offset = 0L str = "output=replicate({"; comma ="" tags = tag_names(input); for i=0, n_elements(tags) -1 do begin if vtypes[i].status then begin str = str + comma +tags[i] + ":lonarr(2)" endif else begin str = str + comma + tags[i]+ ":input[0].("+strtrim(i,2)+")" endelse comma= "," endfor str = str + "},"+strtrim(n_elements(input),2)+")" stat = execute(str) if stat eq 0 then begin print,'MWRFITS: Error: Unable to create temporary structure for heap' return, 0 endif for i=0, n_elements(tags)-1 do begin if vtypes[i].status then begin for j=0, n_elements(input)-1 do begin ptr = input[j].(i) if ptr_valid(ptr) then begin sz = size(*ptr) if sz[0] eq 0 then xsz = 1 else xsz= sz[1] output[j].(i)[0] = xsz output[j].(i)[1] = offset offset = offset + vtypes[i].ilen*xsz endif endfor endif endfor return,output end ; Write the heap data. function mwr_writeheap, lun, vtypes offset = 0L flip = not is_ieee_big() for i=0, n_elements(vtypes)-1 do begin if vtypes[i].status then begin itype = vtypes[i].itype unsigned = mwr_unsigned_offset(itype) ptrs = vtypes[i].data for j=0,n_elements(ptrs)-1 do begin if ptr_valid(ptrs[j]) then begin if (unsigned gt 0) then begin *ptrs[j] = *ptrs[j] + unsigned endif if flip then begin x = *ptrs[j] host_to_ieee,x writeu,lun,x endif else begin writeu, lun, *ptrs[j] endelse sz = size(*ptrs[j]) xsz = 1 > sz[0] offset = offset + xsz * vtypes[i].ilen endif endfor endif endfor return, offset end ; Write the brinary table. pro mwr_tabledat, lun, input, header, vtypes ; ; file -- unit to which data is to be written. ; Input -- IDL structure ; Header -- Filled header nfld = n_tags(input) ; Any special processing? for i=0, nfld-1 do begin sz = size(input.(i)) nsz = n_elements(sz) typ = sz[nsz-2] if (typ eq 7) then begin siz = max(strlen(input.(i))) if siz gt 0 then begin blanks = string(bytarr(siz) + 32b) input.(i) = strmid(input.(i)+blanks, 0, siz) endif endif unsigned = mwr_unsigned_offset(typ) if (unsigned gt 0) then begin input.(i) = input.(i) + unsigned endif endfor if n_elements(vtypes) gt 0 then begin input = mwr_retable(input, vtypes) endif ; Use Astron library routine to convert to IEEE (since byteorder ; may be buggy). if not is_ieee_big() then host_to_ieee, input ; Write the data segment. ; writeu, lun, input nbyte = long(fxpar(header, 'NAXIS1')) nrow = n_elements(input) heap = 0 if n_elements(vtypes) gt 0 then begin heap = mwr_writeheap(lun, vtypes) endif siz = nbyte*nrow + heap padding = 2880 - (siz mod 2880) if padding eq 2880 then padding = 0 ; ; If necessary write the padding. ; if padding gt 0 then begin pad = bytarr(padding) ; Should be null-filled by default. writeu, lun, pad endif end ; Scale parameters for GROUPed data. pro mwr_pscale, grp, header, pscale=pscale, pzero=pzero ; This function assumes group is a 2-d array. if not keyword_set(pscale) and not keyword_set(pzero) then return if not keyword_set(pscale) then begin pscale = dblarr(sizg[1]) pscale[*] = 1. endif w = where(pzero eq 0.d0) if w[0] ne 0 then begin print, 'MWRFITS Warning: PSCALE value of 0 found, set to 1.' pscale[w] = 1.d0 endif if keyword_set(pscale) then begin for i=0L, sizg[1]-1 do begin key= 'PSCAL' + strcompress(string(i+1),/remo) chk_and_upd, header, key, pscale[i] endfor endif if not keyword_set(pzero) then begin pzero = dblarr(sizg[1]) pzero[*] = 0. endif else begin for i=0L, sizg[1]-1 do begin key= 'PZERO' + strcompress(string(i+1),/remo) chk_and_upd, header, key, pscale[i] endfor endelse for i=0L, sizg[1]-1 do begin grp[i,*] = grp[i,*]/pscale[i] - pzero[i] endfor end ; Find the appropriate scaling parameters. pro mwr_findscale, flag, array, nbits, scale, offset, error error = 0 if n_elements(flag) eq 2 then begin scale = double(flag[0]) offset = double(flag[1]) endif else if n_elements(flag) eq 1 and flag[0] ne 1 then begin minmum = min(array, max=maxmum) offset = 0.d0 scale = double(flag[0]) endif else if n_elements(flag) ne 1 then begin print, 'MWRFITS Error: Invalid scaling parameters.' error = 1 return endif else begin minmum = min(array, max=maxmum) scale = (maxmum-minmum)/(2.d0^nbits) amin = -(2.d0^(nbits-1)) if (amin gt -130) then amin = 0 ; looking for -128 offset = minmum - scale*amin endelse return end ; Scale and possibly convert array according to information ; in flags. pro mwr_scale, array, scale, offset, lscale=lscale, iscale=iscale, $ bscale=bscale, null=null ; First deallocate scale and offset if n_elements(scale) gt 0 then xx = temporary(scale) if n_elements(offset) gt 0 then xx = temporary(offset) if not keyword_set(lscale) and not keyword_set(iscale) and $ not keyword_set(bscale) then return siz = size(array) if keyword_set(lscale) then begin ; Doesn't make sense to scale data that can be stored exactly. if siz[siz[0]+1] lt 4 then return amin = -2.d0^31 amax = -(amin + 1) mwr_findscale, lscale, array, 32, scale, offset, error endif else if keyword_set(iscale) then begin if siz[siz[0]+1] lt 3 then return amin = -2.d0^15 amax = -(amin + 1) mwr_findscale, iscale, array, 16, scale, offset, error endif else begin if siz[siz[0]+1] lt 2 then return amin = 0 amax = 255 mwr_findscale, bscale, array, 8, scale, offset, error endelse ; Check that there was no error in mwr_findscale if error gt 0 then return if scale le 0.d0 then begin print, 'MWRFITS Error: BSCALE/TSCAL=0' return endif array = round((array-offset)/scale) w=where(array lt 0) w = where(array gt amax) if w[0] ne -1 then begin if keyword_set(null) then array[w] = null else array[w]=amax endif w = where(array lt amin) if w[0] ne -1 then begin if keyword_set(null) then array[w] = null else array[w] = amin endif if keyword_set(lscale) then array = long(array) $ else if keyword_set(iscale) then array = fix(array) $ else array = byte(array) end ; Write a header pro mwr_header, lun, header ; Fill strings to at least 80 characters and then truncate. space = string(replicate(32b, 80)) header = strmid(header+space, 0, 80) w = where(strmid(header,0,8) eq "END ") if w[0] eq -1 then begin header = [header, strmid("END"+space,0,80)] endif else begin if (n_elements(w) gt 1) then begin ; Get rid of extra end keywords; print,"MWRFITS Warning: multiple END keywords found." for irec=0L, n_elements(w)-2 do begin header[w[irec]] = strmid('COMMENT INVALID END REPLACED'+ $ space, 0, 80) endfor endif ; Truncate header array at END keyword. header = header[0:w[n_elements(w)-1]] endelse nrec = n_elements(header) if nrec mod 36 ne 0 then header = [header, replicate(space,36 - nrec mod 36)] writeu, lun, byte(header) end ; Move the group information within the data. pro mwr_groupinfix, data, group, hdr siz = size(data) sizg = size(group) ; Check if group info is same type as data if siz[siz[0]+1] ne sizg[3] then begin case siz[siz[0]+1] of 1: begin mwr_groupscale, 127.d0, group, hdr group = byte(group) end 2: begin mwr_groupscale, 32767.d0, group, hdr group = fix(group) end 3: begin mwr_groupscale, 2147483647.d0, group, hdr group = long(group) end 4: group = float(group) 5: group = double(group) else: begin print,'MWRFITS Internal error: Conversion of group data' return end endcase endif nrow = 1 for i=1, siz[0]-1 do begin nrow = nrow*siz[i] endfor data = reform(data, siz[siz[0]+2]) for i=0L, siz[siz[0]] - 1 do begin if i eq 0 then begin gdata = group[*,0] gdata = reform(gdata) tdata = [ gdata , data[0:nrow-1]] endif else begin start = nrow*i fin = start+nrow-1 gdata = group[*,i] tdata = [tdata, gdata ,data[start:fin]] endelse endfor data = temporary(tdata) end ; If an array is being scaled to integer type, then ; check to see if the group parameters will exceed the maximum ; values allowed. If so scale them and update the header. pro mwr_groupscale, maxval, group, hdr sz = size(group) for i=0L, sz[1]-1 do begin pmax = max(abs(group[i,*])) if (pmax gt maxval) then begin ratio = pmax/maxval psc = 'PSCAL'+strcompress(string(i+1),/remo) currat = fxpar(hdr, psc) if (currat ne 0) then begin fxaddpar, hdr, psc, currat*ratio, 'Scaling overriden by MWRFITS' endif else begin fxaddpar, hdr, psc, ratio, ' Scaling added by MWRFITS' endelse group[i,*] = group[i,*]/ratio endif endfor end ; Write out header and image for IMAGE extensions and primary arrays. pro mwr_image, input, siz, lun, bof, hdr, $ null=null, $ group=group, $ pscale=pscale, pzero=pzero, $ lscale=lscale, iscale=iscale, $ bscale=bscale, $ no_comment=no_comment, $ silent=silent type = siz[siz[0] + 1] bitpixes=[8,8,16,32,-32,-64,-32,0,0,-64,0,0,16,32,64,64] ; Convert complexes to two element real array. if type eq 6 or type eq 9 then begin if not keyword_set(silent) then begin print, "MWRFITS Note: Complex numbers treated as arrays" endif array_dimen=(2) if siz[0] gt 0 then array_dimen=[array_dimen, siz[1:siz[0]]] if siz[siz[0]+1] eq 6 then data = float(input,0,array_dimen) $ else data = double(input,0,array_dimen) ; Convert strings to bytes. endif else if type eq 7 then begin data = input len = max(strlen(input)) if len eq 0 then begin print, 'MWRFITS Error: strings all have zero length' return endif for i=0L, n_elements(input)-1 do begin t = len - strlen(input[i]) if t gt 0 then input[i] = input[i] + string(replicate(32B, len)) endfor ; Note that byte operation works on strings in a special way ; so we don't go through the subterfuge we tried above. data = byte(data) endif else if n_elements(input) gt 0 then data = input ; Convert scalar to 1-d array. if siz[0] eq 0 and siz[1] ne 0 then data=(data) ; Do any scaling of the data. mwr_scale, data, scalval, offsetval, lscale=lscale, $ iscale=iscale, bscale=bscale, null=null ; This may have changed the type. siz = size(data) type = siz[siz[0]+1] ; If grouped data scale the group parameters. if keyword_set(group) then mwr_pscale, group, hdr, pscale=pscale, pzero=pzero if bof then begin chk_and_upd, hdr, 'SIMPLE', 'T','Primary Header created by MWRFITS v'+mwr_version() chk_and_upd, hdr, 'EXTEND', 'T', 'Extensions may be present' endif else begin chk_and_upd, hdr, 'XTENSION', 'IMAGE','Image Extension created by MWRFITS v'+mwr_version() chk_and_upd, hdr, 'PCOUNT', 0 chk_and_upd, hdr, 'GCOUNT', 1 endelse if keyword_set(group) then begin group_offset = 1 endif else group_offset = 0 chk_and_upd, hdr, 'BITPIX', bitpixes[type] chk_and_upd, hdr, 'NAXIS', siz[0] if keyword_set(group) then begin chk_and_upd, hdr, 'NAXIS1', 0 endif for i=1L, siz[0]-group_offset do begin chk_and_upd, hdr, 'NAXIS'+strcompress(string(i+group_offset),/remo), siz[i] endfor if keyword_set(group) then begin chk_and_upd, hdr, 'GROUPS', 'T' sizg = size(group) if sizg[0] ne 2 then begin print,'MWRFITS Error: Group data is not 2-d array' return endif if sizg[2] ne siz[siz[0]] then begin print,'MWRFITS Error: Group data has wrong number of rows' return endif chk_and_upd,hdr, 'PCOUNT', sizg[1] chk_and_upd, hdr, 'GCOUNT', siz[siz[0]] endif if n_elements(scalval) gt 0 then begin chk_and_upd, hdr, 'BSCALE', scalval chk_and_upd, hdr, 'BZERO', offsetval endif else begin ; Handle unsigned offsets bzero = mwr_unsigned_offset(type) if bzero gt 0 then begin chk_and_upd,hdr,'BSCALE', 1 chk_and_upd, hdr, 'BZERO', bzero data = data + bzero endif endelse if keyword_set(group) then begin if keyword_set(pscale) then begin if n_elements(pscale) ne sizg[1] then begin print, 'MWRFITS Warning: wrong number of PSCALE values' endif else begin for i=1L, sizg[1] do begin chk_and_upd, hdr, 'PSCALE'+strcompress(string(i),/remo) endfor endelse endif if keyword_set(pzero) then begin if n_elements(pscale) ne sizg[1] then begin print, 'MWRFITS Warning: Wrong number of PSCALE values' endif else begin for i=1L, sizg[1] do begin chk_and_upd, hdr, 'PZERO'+strcompress(string(i),/remo) endfor endelse endif endif bytpix=abs(bitpixes[siz[siz[0]+1]])/8 ; Number of bytes per pixel. npixel = n_elements(data) + n_elements(group) ; Number of pixels. if keyword_set(group) then mwr_groupinfix, data, group, hdr ; Write the FITS header mwr_header, lun, hdr ; This is all we need to do if input is undefined. if (n_elements(input) eq 0) or (siz[0] eq 0) then return ; Write the data. host_to_ieee, data writeu, lun, data nbytes = bytpix*npixel filler = 2880 - nbytes mod 2880 if filler eq 2880 then filler = 0 ; Write any needed filler. if filler gt 0 then writeu, lun, replicate(0B,filler) end ; Main routine -- see documentation at start pro mwrfits, xinput, file, header, $ ascii=ascii, $ separator=separator, $ terminator=terminator, $ create=create, $ null=null, $ group=group, $ pscale=pscale, pzero=pzero, $ alias=alias, $ use_colnum = use_colnum, $ lscale=lscale, iscale=iscale, $ bscale=bscale, $ no_types=no_types, $ silent=silent, $ no_comment=no_comment, $ logical_cols=logical_cols, $ bit_cols=bit_cols, $ nbit_cols=nbit_cols, $ version=version ; Check required keywords. if (keyword_set(Version)) then begin print, "MWRFITS V"+mwr_version()+": February 18, 2002" endif if n_elements(file) eq 0 then begin if (not keyword_set(Version)) then begin print, 'MWRFITS: Usage:' print, ' MWRFITS, struct_name, file, [header,] ' print, ' /CREATE, /SILENT, /NO_TYPES, /NO_COMMENT, ' print, ' GROUP=, PSCALE=, PZERO=,' print, ' LSCALE=, ISCALE=, BSCALE=,' print, ' LOGICAL_COLS=, BIT_COLS=, NBIT_COLS=,' print, ' ASCII=, SEPARATOR=, TERMINATOR=, NULL=' print, ' /USE_COLNUM, ALIAS=' endif return endif ; Save the data into an array/structure that we can modify. if n_elements(xinput) gt 0 then input = xinput on_ioerror, open_error ; Open the input file. ; If the create keyword is not specified we ; try to open the file readonly to see if it ; already exists and if so we append to it. ; An error implies the file does not exist. ; ; We use this rather circuitous route to handle ; the unix ~ construction consistently -- findfile ; doesn't reliably understand that. ; if not keyword_set(create) then begin on_ioerror, not_found openr, lun, file, /get_lun free_lun, lun on_ioerror, null if !version.os eq 'vms' then openu, lun, file, 2880, /block, /none, /get_lun, /append $ else openu, lun, file, /get_lun, /append bof = 0 goto, finished_open endif not_found: on_ioerror, null if !version.os eq 'vms' then openw, lun, file, 2880, /block, /none, /get_lun $ else openw, lun, file, /get_lun bof = 1 finished_open: siz = size(input) if siz[siz[0]+1] ne 8 then begin ; If input is not a structure then call image writing utilities. mwr_image, input, siz, lun, bof, header, $ null=null, $ group=group, $ pscale=pscale, pzero=pzero, $ lscale=lscale, iscale=iscale, $ bscale=bscale, $ no_comment=no_comment, $ silent=silent endif else if keyword_set(ascii) then begin if bof then mwr_dummy, lun ; Create an ASCII table. mwr_ascii, input, siz, lun, bof, header, $ ascii=ascii, $ null=null, $ use_colnum = use_colnum, $ lscale=lscale, iscale=iscale, $ bscale=bscale, $ no_types=no_types, $ separator=separator, $ terminator=terminator, $ no_comment=no_comment, $ alias=alias, $ silent=silent endif else begin if bof then mwr_dummy, lun ; Create a binary table. mwr_tablehdr, lun, input, header, vtypes, $ no_types=no_types, $ logical_cols = logical_cols, $ bit_cols = bit_cols, $ nbit_cols= nbit_cols, $ alias=alias, $ no_comment=no_comment mwr_tabledat, lun, input, header, vtypes endelse free_lun, lun return ; Handle error in opening file. open_error: on_ioerror, null print, 'MWRFITS Error: Cannot open output: ', file if n_elements(lun) gt 0 then free_lun, lun return end